FIRE RETARDANT TESTS
ASTM E-84 (NFPA 255, UL 723) Steiner Tunnel Test
- ASTM E-84 10 Minute flame spread and smoke (douglas fir)
- ASTM E-84 10 Minute flame spread and smoke (cement board)
- ASTM E-84 10 Minute flame spread and smoke (carbon fiber)
- ASTM E-84 10 Minute flame spread and smoke (foam, co-polymer)
- ASTM E-84 10 Minute flame spread and smoke (fiberglass/foam composite panel)
- ASTM E-84 10 Minute flame spread and smoke (24 gauge metal plate)
- ASTM E-84 Extended 30 minute (1/4” fiberglass shower pan)
- Ff88 is listed and and inspected by the International Code Council (ICC)
British BS 476 Part 6 & 7
- 12mm Timber OSB
- 12mm Timber Plywood
- 16mm Gypsum Board
- 12mm Gypsum Board
Room Corner Test, UBC 8-2, NFPA 286, UBC 26-3 (Part 1 of FM Class 4880)
- Polyurethane spray foam
- AC plywood
- Douglas fir
- Masonite board
- Cedar Shingles
- Mahogany paneling
- OSB siding
- Lap siding
FM 4975 Hydrocarbon Ceiling Test
- Douglas fir
- Cellulose ties
- 1/2” Gypsum
AS1530.3 Australian Standard (CSIRO)
New Zealand (NZ) Building Code C3.4(a), ISO 9705:1993
FIRE RESISTANT TESTS
ASTM E-119, CAN & ULC-S101, AS1530.4
- One (1 ) Hour Wall Assemblies
- Sheetrock
- Lath & Plaster
- Wood
- Two (2) Hours Wall Assemblies
- One (1) Ceiling Assemblies
- Sheetrock
- Wood
- Plaster
- Embossed Tin
- Two (2) Hours Ceiling Assemblies
- Sheetrock
- Wood
- Plaster
- Embossed Tin
AS 1530.4 Australian Standard (CSIRO)
- One (1) Hour Wall Assembly
- Plasterboard
- Pressed Metal Ceiling
- Polyester composite
- Masonry brick wall
- Douglas fire timber
- 30/30/30 Rating
European Standard, EN 13501-1 (PN)
- Two (2) hours rating, Plywood, B-s2, d0- 120 minutes
UBC 7-2 Doors
- ASTM E-119, 45 minutes
- ASTM E-119, 30 minutes
- UL 10C 120 minutes, positive pressure
Spray Polyurethane foam/foam panels
- ASTM E 119, 15 minutes thermal barrier
- 24 gauge steel, polyurethane foam
- OSB, polyurethane foam
- Gypsum board, polyurethane foam
- IBC 26-3, 15 minutes room corner test
- Low density open cell foam
OTHER TESTING
Toxicity Tests
- BSS-7239-88, Boeing test
- University of Pittsburg, Combustion Product Toxicity
- ASTM E-662-97 Smoke Density
- ASTM D 3675-98, ASTM E 162-98, Radiant Panel
ASTM E 1623 I-Cal
- 26 gauge metal, T-111 Douglas fir, AC plywood, OSB, Sheetrock, cellulose tiles, polyurethane foam, mahogany
paneling, steel plate.
- Aluminum Cladding Panels (ASTM 3408)
ASTM E 1354-94, Cone Calorimeter
- Fiberglass panels, Polyester GRP composite, plastic panels, plastic playground tubes.
FAR Part 21.607 Flammability
Fire Testing of Li-Ion Batteries in Cardboard Boxes
Test reports available upon request.
Qualifies for LEED v4 Credit |
CDPH/EHLB Standard Method v1.2, 2017 Emissions |
Meets VOC regulations (OTC, SCAQMD CARB) |
Master Painters Institute® (MPI) Green Performance® GPS1/GPS2 |
YES |
YES |
YES |
YES |
- Firefree coatings may contribute up to five LEED points
- Tested by Independent ISO/IEC 17025 Accredited Laboratory
- MEA # 320-99 City of New York
- UL # R14654 Classified on OSB, Douglas fir
- FM Approved, per FM 4975
- ICC Listed, ESR 4271
- Class O, per BS 476 Part 6 & 7
- Class 1-S, per NZBC Verification Method
How to Order